3M™ Accuspray™ Atomising Head for PPS™ Series 2.0
- | Select product options for IDs.
Details
Highlights
- To be used with 3M™ PPS™ Series 2.0 items only
- Use on any application, such as wet on wet primer, primer surfacer, basecoat, topcoat, lacquer, adhesives and some coatings
- Apply with any 3M™ Accuspray™ Replaceable Nozzle Series Spray Gun
- Transparent atomising head/nozzle allows you to see if it needs cleaning or replacing
- 4 atomising heads per kit
The 3M™ Accuspray™ Atomising Head for PPS™ Series 2.0 is an approved 3M replacement part to use with any 3M™ Accuspray™ Replaceable Nozzle Series Spray Gun. This product is only to be used with the 3M™ PPS™ Series 2.0 items.
Designed to provide the ideal atomisation for a wide range of spray coatings, 3M™ Accuspray™ Atomising Head for PPS™ Series 2.0 are an integral part of our 3M™ Accuspray™ Spray Gun system. These replaceable, reusable atomising heads are incrementally sized for ideal atomisation, whether you’re applying low-viscosity coatings such as waterborne, solvent basecoat paint, or higher-viscosity coatings such automotive primers or adhesives. These heads are easily cleaned and reused, or can be quickly removed and replaced for the performance of a new spray gun on demand. Further benefits include optimised primer consumption, lower application time and less time for cleanup, plus a better finish which results in less sanding time. Each replaceable atomising head is molded from clear plastic so technicians can easily see when the head is clean to reduce cleanup times. 3 sizes of colour coded 3M™ Accuspray™ Atomising Head for 3M™ PPS™ Series 2.0 are available: 1.4 mm atomising heads deliver fine atomisation with minimal overspray, making it ideal for lower-viscosity materials such as automotive sealer, paint, topcoats, lacquers and light adhesives. 1.8 mm replaceable atomising heads are ideal for med-viscosity to hi-viscosity coatings such as auto primers, lacquers and adhesives. 2.0 mm atomising heads are typically used with our 3M™ Accuspray™ HGP Spray Gun, built specifically for applying high-volume, high-viscosity fluids. Use these heads for applying gel coats, adhesives, undercoatings, high build primers, specialty and sound dampening coatings. Further benefits include reduced primer consumption, lower application time and less time for cleanup, plus a better finish which results in less sanding time. Only compatible with 3M™ PPS™ Series 2.0.
Typical Properties
Resources
Connect with us. We’re here to help.
Related Products
| Inner Diameter (Metric) | 1.4 Millimetre, 1.8 Millimetre | |||
| Product Color | Transparent, Orange | |||
| Product Type | Head |
3M™ Accuspray™ Atomising Head for PPS™ Series 2.0
3M™ PPS™ Series 2.0 UV Kit
3M™ PPS™ Series 2.0 Cups
3M™ PPS™ Series 2.0 KitsFor industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labelled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labelled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards, as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
